BITKOM Academy Expands Education From

BITKOM Academy expands education – BITKOM daughter cooperates with Science Park Potsdam-GOLM in-house seminars for resident companies – up to 80% promotion through European Social Fund Berlin, December 8, 2010 cooperates from the BITKOM Academy immediately with the Science Park Potsdam-GOLM. The subsidiary of high-tech Association BITKOM collaborates with the associated with the Science Park qualification Alliance (QVP) in the field of training. Together with the associated with the Science Park qualification Alliance Potsdam (QVP), the Academy offers individually tailored open and in-house seminars. Straight young entrepreneur we want to encourage and provide the necessary tools for a successful business building on the hand”, says Anja Olsok, Member of the BITKOM Board. A special service of cooperation lies in the advice and support to promote the training. Through the European Social Fund (ESF), up to 80 percent of the seminar can depending on the Federal State and Training costs are funded. BITKOM Academy and QVP identify suitable training in the respective companies and assist them in applying for subsidies.

The Science Park in particular young entrepreneur are located at two Fraunhofer, three Max Planck institutes and the University of Potsdam total over 3,000 people are employed. The Potsdam qualification Alliance is a network of different companies and partners. In the framework of the Association qualification and further training measures are offered for employees of member companies companies close. In addition business-related services for technology-oriented start-ups and businesses are provided. Members of QVP are not just companies in the Science Park Campus Hermannswerder, as well as companies from the region but also of the biotech company. More information under: about the BITKOM service company mbH: BITKOM Service Gesellschaft mbH is a company of the Federal Association for information technology, telecommunications and new media e.V.

(BITKOM). The Federal Association for information technology, telecommunications and new media e.V. represents more than 1,350 companies, 1,000 direct members with approximately 135 billion euros turnover and 700,000 employees. These include providers of IT services, software and telecommunications services, manufacturer of hardware and consumer electronics, as well as companies of digital media. BITKOM is committed in particular for better regulatory frameworks, a modernization of the education system and an innovation-oriented economic policy. Press contact: Martin Pangritz head of BITKOM Academy BITKOM service company mbH Albrechtstrasse 10 d-10117 Berlin telephone: 030.944002-48 fax: 030.

Posted on by

Scientific Advisory Board

Scroll version, scroll translations with scroll viewport K15t software provides a platform for version management, multilingualism and the use of Confluence as Web CMS also available. The use cases are particularly in the context of content strategy and technical documentation. Over 1000 large and small organizations among the customers of K15t software. Under other Allianz life, Bosch, Deutsche Bahn, NASA, Oracle, Siemens, and WWF. See for complete information about the K15t Software GmbH. About across systems GmbH across German headquartered in Karlsbad (Karlsruhe), and a U.S. branch in Glendale (in Los Angeles) is manufacturer of the across language server, a market-leading software platform for all language resources and translation processes within the company. Through the use of across can at higher Translation quality and more transparency of costs and thus process be reduced within a very short time.

The language server can be used on conforming 15038:2006 for translation services EN with the DIN. Across systems GmbH is a certified partner of Microsoft, which ensures the successful implementation of Microsoft technologies. Integrating across IT environments is possible thanks to a software development kit (SDK). For this purpose, the Department of business services & support across and well-known system integrators and technology partners provide support. In the context of product development, cooperates with international universities and colleges across and is professionally accompanied by an own Scientific Advisory Board. Also with well-known technology companies and language service providers, the software manufacturer opts partnership for years. Customers across are (excerpt): 1 & 1 Internet AG, Allianz Versicherungs AG, HypoVereinsbank, Miele, SMA solar technology AG, ThyssenKrupp and v. m.

Posted on by

Gudrun Tadepalli CAD

Plant construction software for renewable energy on the NextGen 2013 Moers, Germany 21 November 2013: the promotion of renewable energy with affordable engineering software projects is at CAD Schroer atop the agenda. The CAD-software provider presented its latest developments in March at Biogaz Europe, in April on the sustainability live and in October on the NextGen 2013. For eco-friendly plants and factories, the worldwide environmental awareness drives local politics and the use of new environmentally friendly technologies for a more efficient utilization of renewable energy sources. Combined with combined heat and power biomass, anaerobic digestion and bio waste electricity generation (EFW) were the focus of many energy conferences this year,”says Anke Adams by CAD Schroer UK. We took part in the conferences, to help the profitability in the planning and execution of engineering projects in the field of renewable energies more efficiently to make.” CAD schroer group presented its 3D-Anlagenbau-Software, the it project engineers enables systems to plan whatever size, with engaging full supply techniques and to create cost estimates for brownfield – or greenfield projects quickly.

Companies that use MPDS4 for projects in the field of alternative and renewable energies, receive a 70% discount on the software of CAD Schroer. Also the maintenance and support are offered similarly beneficial. MPDS4 demo videos: produkte/mpds4/anlagenbau.html MPDS4 for renewable energy: produkte/mpds4/mpds4-aktion-fuer-alternative-und-erneuerbare-energien.html comprehensively informed about renewable energy visitors of the NextGen 2013 could with a challenging and diverse Conference programme in detail about energy efficiency, reduction of carbon dioxide emissions and financing, planning, preparation and operation of supply systems for energy generation from renewable energy sources inform themselves. Speakers on four different stages concentrated on small systems such as biomass or Power heat cogeneration plants in urban areas in the immediate vicinity of the consumer. The sections of the Conference brought visitors with topics such as current legislation and industry analysis on the cutting edge. We are pleased that we can contribute to the sustainability debate with our software and our expertise, as well as the technology that makes the system planning as productive and profitable as possible,”so Anke Adams. CAD Schroer CAD Schroer is a global developer and provider of engineering solutions. Company of mechanical and plant engineering, automotive and supplier industry, as well as the public utilities, energy and water management are its target market.

With several branch offices and subsidiaries in Europe and the United States the company presents itself today more and more up-to-date than ever. CAD Schroer’s product range includes solutions from the area of construction, plant construction, factory planning and data management. Companies in 39 countries rely on MEDUSA, MPDS and STHENO / PRO, to move efficiently and flexibly in an integrated design environment between all phases of product or system development. In addition, customers are supported through services such as consulting, training, maintenance and technical support in achieving their goals. This and an individual customer care ensure higher competitiveness, lower costs and better quality. How to contact with Gudrun Tadepalli CAD of Sakala GmbH Fritz-Peters-Strasse 11 47447 Moers website: email: phone: Germany: + 49 2841 9184 0 England: + 44 1223 460 408 France: + 33 141 94 51 40 Switzerland: + 41 44 802 89 80 Italy: + 39 02 49798666 United States: + 1 866-SCHROER (866-724-7637)

Posted on by

PCs Topology

Output of a PC connected to the input of another. Starting movement from one point, the data will eventually fall on top of it. The data in the ring always moving in the same direction. This network topology does not require additional hardware (servers, or hubs), but the failure of one computer stops working and the entire network. 4. Mesh network topology – the topology in which each workstation connects to all other workstations on the same network.

Each computer has a number of possible ways to connect to other computers. Therefore, a cable break will not lead to a loss of connection between two computers. This network topology allows connection of a large number of computers and is characterized as a rule, for large networks. 5. Mixed topology used several types of connecting computers together. It is rarely found in large companies and organizations.

Why do you need to know all kinds of topologies and their pros and cons? The scheme depends on a network of hardware and software. Topology is selected, based on the needs of the enterprise. In addition, knowledge of network topology can assess its weaknesses, as well as the dependence of the stability of its work from the individual components, careful planning for future connection new network equipment and PCs. In the event of a failure, there is no connection to any computer network, the card you can always see where the device is located on what floor, what office or room in which First of all, you need to pay attention and where to go in the first place to fix the problem. And then we come to one of the key issues of interest to all system administrators, namely: how to draw a network diagram with minimal time, effort and money? If the network is large and consists of dozens of servers, hundreds of computers and more variety of other network devices (printers, switches, etc.), even an experienced system administrator – not mention the opener – it is very difficult to quickly understand all the connections between network equipment. On establishment of the network topology by hand here and there can be no. Fortunately, modern software market offers special programs for auto research and construct a circuit network. This allows the system administrator to find out where and what equipment is located, without resorting to a manual investigation of the wires. Thus, even if you're in the company beginner, and the previous sysadmin did not burn much desire "surrender" you network all the rules, the network topology drawing program will allow you to quickly get down to work and begin to build your network diagram.

Posted on by

Production Planning

FLS: Trends of production planning for 2014 Eschweiler, 3rd December 2013 FLS offers views on trends and challenges developments in the area of production planning and control (PPC) for the year 2014: the variety of products is rising due to the change in consumer behavior. Companies are challenged to improve processes in order to secure the pool position prior to the competition. Because anyone who can deliver more reliable and cheaper, especially with shortages. According to FLS, systems (MES) in the manufacturing industry, a provider of software for manufacturing execution manufacturing companies with following developments and challenges faced: manufacturing companies are under increasing pressure to meet the demand and the needs of their customers. They expect constant readiness in an increasingly changing assortment and decreasing quantities per article. This can be measured particularly at times of high demand, such as E.g. a heat wave in the summer, an early onset of winter, or even seasonal events in the year.

The production can’t then with conventional planning, on short-term contracts, changes, fast enough to respond to bottlenecks or outages. Companies must be flexible in your production and yet continue to cost effectively produce, to remain competitive. A production planning optimization must be at the top on the priority list. Following trends for production planning are: 1. increasing of productive hours setup time optimization.

The high times and set-up costs offer savings in production planning. These are caused through the conversion of the machines and thus connected standstill of production facilities and high personnel costs. The focus of the production planning is the calculation and reduction of set-up time and cost. It aims to avoid the costly setup, waiting and waiting times through a meaningful sequence planning. Use a matrix of set-up time is unsuitable because the first level and the subsequent care with a high effort, are connected. After a relatively short time can be traced barely, as the individual values are reached.

Posted on by

Already PORTOLAN

Mobile financial analysis on IBM power system i – AS 400 after successful projects in 2013, looks confidently to the coming business year the PORTOLAN Commerce Solutions GmbH. Another 34 renowned companies from 11 countries had over 400 customers. For example, the traditional company van Laack has decided for the use of the accounting software PORTOLAN EVM. Chief Financial Officer Franz Kalinowski confirmed: we are very satisfied with the solution and support from PORTOLAN. The Vista is the implementation has worked excellently”on the coming year under a good star. We start with a good order backlog in the new year. Already 70 requests for 2014 have gone to this day in us and in editing. We look confidently into the new year and look forward to exciting challenges.

“, says Managing Director Joachim Nurk. In addition, the Ilsfelder PORTOLAN Commerce Solutions GmbH presented their new software product FINA “. With the mobile financial navigation, the user will receive mobility in real time, without synchronization requirements. New approaches in forward-looking technologies are taken with FINA. The flexible availability of financial information is already desire of many decision-makers “, as Joachim Nurk. FINA is a part of the PortoWeb 3.0 – product generation 2014 coming on the market. In addition to the mobile financial analysis via Tablet report expands the selection lists to open items according to maturity structure. According to role-based selection, in addition still the daily p & l and balance sheet data available are the users. With market ready by PortoWeb 3.0 different versions offered by the base facilities to the premium version, including Apple TV.

Posted on by

Alawite Morocco

It was founded by the Almoravids in the 11th century and originally consisted only in a military settlement. Under Sultan Moulay Ismail (1672-1727), founder of the Alawite dynasty, became a capital. During the reign of the Sultan, it was converted into a city of Hispano-mauresque style, surrounded by high walls and large doors. 5 Archaeological site of Volubilis Volubilis is an example exceptionally well preserved of a large Roman colonial town on the fringes of the Empire. Read more from Ray Kurzweil to gain a more clear picture of the situation. BC was founded in the 3rd century and became an important outpost of the Roman Empire, as well as the capital of Mauritania. As such, was graceful as many and magnificent Romanesque buildings. He also became the capital of Idris I, the founder of the Idrisid dynasty, during a brief period. 6 Medina of Tetouan (formerly known as Titawin) being the main point of contact between Morocco and Andalusia, Tetuan had was especially important during the Islamic period, from the 8th century onwards.

After the reconquest of the Iberian Peninsula, the city was rebuilt by Andalusian refugees, whose work is a clear sample of the Andalusian influence and exhibits all the characteristics of the high Andalusian culture. The medina of Tetuan, despite being the smallest of Morocco, has remained intact for the subsequent foreign influences and is without a doubt the most complete of all Moroccan medinas. 7 Medina of Essaouira (formerly Mogador) Essaouira was designed by a French architect deeply influenced by the work of Vauban at Saint-Malo and is an extraordinary example of late 18th century fortified town, built according to the principles of contemporary European military architecture in the context of North Africa. 8 City Portuguesa of Mazagan (El Jadida) the Portuguese fortification of Mazagan, now part of the city of El Jadida and one of the early settlements of the Portuguese explorers in West Africa en route to the India, was built as a fortified early 16th century colony. It was taken by the Moroccans in 1769. The fortress, with its bastions and ramparts, is an example of the principles of Renaissance military design. Several Portuguese notable buildings from the Portuguese period, have survived such as the cistern and the Church of the assumption, built in Gothic style from the beginning of the 16th century Manueline. 9.

The Cultural space of the square Jemaa el-Fna square Jemaa el Fna of Marrakech Marrakech is a very special place and it is considered by UNESCO as Intangible Heritage by represent a unique concentration of Moroccan cultural traditions represented through music, religious and artistic expressions. These oral expressions have been continually renewed by bards (imayazen), who used to travel through Berber territories. They continue today by combining words and gestures to teach, entertain and Captivate the audience. So, if you are planning to visit Morocco, these do not miss spectacular places world heritage of UNESCO. They can stay in one of the fantastic hotels in Marrakech, or in a typical riad in Marrakech, as well as in a villa in Marrakech. Come to Morocco and enjoy the culture, history and architecture of this wonderful and fascinating country. Original author and source of the article.

Posted on by

Difficult Choice Gifts

Personally, I prefer silver to gold. Perhaps many will disagree with me. And bring lots of arguments in favor of gold. But first, the silver suits me more. Second, prices for silver jewelry below and I purchase in larger quantities than gold.

The third is not so offensive, if you lose a bracelet or something like that.:) And fourth, I just like to shine the silver, and all). So when I give something out of this metal as gift – I loved it. And then decided to write an article at your leisure on the choice of jewelry for fans of gray metal, as I do. Going into a jewelry store, the eyes diverge from the abundance of variety. The choice is difficult not only by the choice of the the subject, but in some cases, the stones that adorn it.

Here we need the following information about the person. If you do not know, try to observe the object of giving and to draw conclusions. So we need. The following facts: style, which adheres to a person, the color, which he prefers to dress, sign of the zodiac, or at least find out the date of birth, eye color, temperament, what he lacked in life – love, money, etc. Let us pick up a gift for Based on this information. Let’s start with the most in my opinion a simple method for the sign of the zodiac. Aquarius (21.01 – 20.02) is recommended to wear jewelry with the following gems: aquamarine, amethyst, garnet, quartz, obsidian, pearl, rose quartz, chrysoprase, and zircon. Pisces (21.02 – 20.03) preferred aquamarine, jet, Hyalite, emerald, coral, moonstone, neptunium, opal, pearl, haliotis, chrysolite. Aries (21.03 – 20.04) may be the product of a diamond, rock crystal, zircon, kyanite, bovenitom. Taurus (21.04 – 20.05). Taurus astrologers advise to wear aventurine, agate, alexandrite, turquoise, kyanite. Gemini (21.05 – 21.06). This sign of the zodiac match these stones: agate, amethyst, heliodor, cat’s eye, rhodonite, carnelian, tiger eye, citrine, Charoite. Cancer (22.06 – 07.22). At the cancer will have an impact: aventurine, aquamarine, hematite, emerald, pearl, moonstone. Leo (23.07 – 23.08) will shine in: heliodor, rock crystal, obsidian, ruby, tourmaline, amber. Virgo (24.08 – 23.09) will be the most mysterious, if you will wear jewelry with aventurine, heliotrope, rock crystal, jade, cat glazoom, jade, onyx, carnelian, tiger eye, jasper. Libra (24.09 – 23.10). Weights help balance the fluctuating nature: azurite, aquamarine, amethyst, angel, jade, kyanite, rhodonite, rubellite. Scorpio (24.10 – 22.11). Scorpions are not vulnerable to products with stones: alexandrite, apatite, jet, garnet, topaz. Sagittarius (23.11 – 21.12). Sagittarius recommend the following stones: alexandrite, turquoise, gelitrop, lazulite, obsidian, sapphire, tourmaline, chalcedony. Capricorn (22.12 – 20.01) will feel more confident in Almaden, jet, smoky quartz, obsidian, tourmaline. The method of selecting a gift for the zodiac sign – it’s not taboo. Buy a gift you can not only guided by it. But if the sign of the zodiac but do you know nothing about a woman, so you can at least argue choice of gift.

Posted on by

ERP Solution

Integrated solutions for the plant and machine construction over 30 years CAD experience can Werner Heckl and Joachim Mack, Executive Director of the solid system team present. What to next as a pure reseller company for CAD software started, developed in recent years by the gradual expansion of the portfolio to systems such as ERP, PDM, PLM or also for cloud services to a provider of complete solutions for efficient processes in plant and machine construction. A complete reorientation of the company, that communication to be underlined by the new image film of the company was associated. Continuous processes rather than isolated solutions efficient process management and continuous flows of information, are increasingly becoming key success factors in plant and machine construction. The expansion of the solution portfolio for SST was a response to changing customer requirements: grown in the course of time IT systems of the various departments often consist of isolated solutions, not in the rest of the system environment are integrated.

In cross-departmental cooperation, there are therefore many system breaks that lead to inefficient processes. Due to the full integration of individual solutions for a comprehensive overall solution, the SST developed a concept with a clear added value for their customers. Werner Heckl (Managing Director) about the positioning of the SST as a solution provider: “ultimately we offer already for years, solutions for CAD systems, which overlap and are compatible. We can offer what began with a handful of customers and individual solutions, now on a wider scale and at much cheaper prices.” Joachim Mack (Managing Director) to: “However, the personal attention of our clients remains an integral part of our corporate policy. Because only when we know the customers and their needs, we will find the right solution and can also continue to develop us.” Efficient processes – SST shows how BBs with her vivid film of illustration that shows SST, how radically simplify complex processes in the enterprise by seamlessly integrated IT solutions. The film makes it clear how a total solution with ultimate value added is created by the individual, intelligent teeth in the construction environment of required applications of.

Innovative concepts such as cloud services are taken into account. This underlines that the SST on new requirements has always the right solution. _ the company/solid-system-team-gmbh.html press contact solid system team GmbH Christiane Plank on the marketplace 7 D-93152 Highland Tel. + 49 9404 9639-0 about solid system team GmbH the solid system team GmbH sees itself as a nationwide provider of solutions in the 3D-CAD segment for machine and plant construction, conveying systems, EDM/PDM and PLM. As a certified systems integrator for solid edge is not only point of contact for the implementation of the solid system team GmbH, but provides also advice for the Process management and individual solutions for the use of solid edge. CAx – and PLM components from Siemens PLM software based on worldwide common Microsoft standards form the basis of the solutions. The performance spectrum ranges from the conception, which can already start at remediation tasks or value analysis about the development of process-optimizing technologies up to the development and implementation of company.

Posted on by

ChannelChooser

Do ever wondered how you can watch TV on your computer? I’m pretty sure that there is a probability that you want, and even sought ways of doing so. There are some methods that I would like to share with you in this article. Some are free and others are not. Free methods to watch TV on your computer are transmission sites of TV Online, such as wwiTV and ChannelChooser, which lets you watch TV on your PC for free. There is a good amount of entertainment programs available that you can use. But since they are free, don’t expect any kind of services. There are always millions of people browsing and loading is incredibly slow. The transmission has a while before starting so you will see absolutely nothing.

And to complete the bandwith is limited, the picture quality is terrible, and it takes a long time to load completely a movie or a channel. Another method you can use is to buy a copy of pirated TV card. You can find large number of offers in the auctions of eBay. These emulators intercept each television station signals and you can watch different channels. You can get one for $100 or a bit more. But in spite of all this method has its setback.

Television providers are constantly hunt looking for this type of business of pirates, the new jamming devices are created and programmed to stop these pirates. And in case you think that you can get with it, think again. Also can be judged.It is sad to say, but the sentence can be days to months in prison. The best method and the most popular is to buy software, install to your pc and get channel legally. It is accessible at a price of less than $60 dollars and it’s a single payment for the use of lifetime. With this software, you can tune in to more than 3000 channels from around the world. Not only that, you may hear different types of radio also broadcasts.

Posted on by