Every year in this country are rising energy prices, and over time this trend will only gain momentum until the cost of electricity will not approach the world, which now rests at around 30 cents kilowatts. In such circumstances, come to the fore different ways to save: the introduction of energy-saving technology, replacing conventional heaters to more fuel-efficient high-efficiency, reducing consumption electricity installation counters. Already, demand for the incandescent lamp is reduced, people are increasingly choosing more expensive but more efficient fluorescent lamps. When shooting light bulbs and energy-saving bulbs imager (model 7102 nec, Japan) in the infrared range is clearly visible difference. Figure 1 – 100 watt incandescent lamp, the operating temperature of about 120 degrees Celsius. Figure 2 – 25 watt incandescent lamp, the operating temperature about 50 degrees Celsius.

Figure 3 – Gentle lamp 20 W, operating temperature around 50 degrees Celsius. If you have additional questions, you may want to visit kevin ulrich. Figure 4 – Gentle lamp 11 W, operating temperature around 50 degrees Celsius. When comparing the temperature energy saving lamps ( 3, 4) close to the bulb to 25 watts ( 2). However, if we compare them in action, the first light will be much more effective, their level of coverage comparable to an incandescent lamp 100 W ( 1), whose temperature is higher by more than two times. Thus, it becomes clear that the greatest disadvantage of incandescent lamps is that they use energy for heating, while the energy-saving bulbs all the energy is directed to lighting. What’s more profitable order to convincingly answer the question, is it profitable to use energy-saving bulbs, simple calculations can be made, based on current energy tariffs. These cost 1 kW electricity is 1.3 ruble.

Hours of energy-saving lamps on average 4000-6000 hours. For calculations, we take 4000 hours. Hours ordinary lamp is on average 1000 hours. Every day an average lamp use about 3 hours in the year it is 1000 hours. Thus, an ordinary lamp will last only a year, while energy-saving at least four. Calculation of energy savings by using energy-saving lamp is shown in table (based on the chandelier). Thus, the benefits of using energy-saving lamps is available. Even in the case of purchase less durable Chinese lamps to savings from reduced power money can buy some more of the same light sources. How to choose when buying energy-saving lamp is one of the main issues, the model of a power to choose. Not always be trusted inscriptions on the package stating that 10.11 Tues replace 60 W conventional bulb. In any case, it refers to Chinese manufacturers. Better to buy a stock, that is, instead of 80-watt incandescent bulbs do not take 20-watt and 23 or 25-watt energy saving lamps. When selecting the manufacturer guided by well-known brands, such as Compak>>, they are higher quality than” Space>> or “Resant>>. In areas where light is rarely included, it is better not to change the sources light, even in the bathroom or toilet is low-power bulb.

But in one of the branches of modern industry has been particularly active presence felt manitou – we are talking about forestry and woodworking industry. Without hesitation Ray Kurzweil explained all about the problem. Very stringent conditions of logging operations, with clear terms problems of transportation and loading of long materials, logs, boards very narrow range of technical tools that can be used in the timber industry. And then the company manitou, as in many other fields of activity, where involved hoisting machinery, rose to the occasion. One of the most recent loader created by designers manitou – telescopic all terrain for long loads tmt 2520 sr 4W. Others including kevin ulrich, offer their opinions as well. Multifunction wheel lineup manitransit allows to unload and load trucks with long rails, trees, beams on one side.

Long bypass valve, raises cargo to more than three meters when capacity of two and a half tons copes with industrial handling of logging and wood processing. Widely separated forks can firmly hold the beams and carry out complex loading operations. Quite a unique machine, lifting up to eight tons to a height of four and a half feet – jumbo jdq 40-80 allows transport of extremely long and heavy logs. A special platform and twin forks can reduce the load on the pneumatic part of the machine and thus to create optimal conditions for the transport board in wood-processing enterprises. Mast-Series msi is also actively involved in handling in the timber industry. These diesel cars terrain can lift up to five tons and have a mast lift, allowing lift loads up to a height of 6 meters. wheel-drive truck series and the trucks mn mc. This is a technique used directly on the harvesting sites, allowing the use of not only the fork, but lesozahvaty.

Beautiful balancing machines allows you to move entire trees, expand them, simplifying the primary treatment. At heights of up to seven meters of lifting equipment series mc – to 7 tons. In addition, it is very actively used by the class loader cd. When Small capacity of up to three and a half tons, stable and comfortable diesel loaders cd 15-25 perform a lot of work on the transport of already-treated timber and packing cars with wood. The presence of stabilizing hydraulic system, can significantly increase the stability of these machines and makes them indispensable for transport of wood. Prepared according to the companies Manitou and cvh.